"Energy-efficient houses are the new norm everyone is chasing after. Nowadays, building the houses has become a key venture. Here is how to build them."

10 Tips to Build an Energy-Efficient Tiny House

Energy supply is a crucial requirement for anyone before they establish a residence. Whether it’s a residential house or one meant for commercial purposes, the current living conditions require adequate energy supply. All forms of energy are now available, both renewable and non-renewable.

However, with the campaign to front the environmental-friendly sources of energy, renewable sources of energy are getting the boost to supply us with energy for daily needs. The energy requirement for a tiny house is proportional to its size and the home improvement tools you use. This article correctly illustrates how to build one.

1. Architectural Planning of The Tiny House

The planning and design of your house should conform to your demands and the energy requirements.

First, you should be no stranger to what is tiny house living. Planning the room designs will enable you to estimate how much energy you will need to supply the tiny residence with power adequately.

You may need to exclude energy-dependent equipment such as drills or saws in the residence as they have a high probability of shooting up the energy bills. Plan for the basics; kitchen, bedrooms, a tiny living room, ablution, and a small accessory dwelling unit for your tiny house will be sufficient.

2. Geographical Location Matters A Lot

Carefully selecting the appropriate location of your tiny residence could prove to be the difference when energy supply comes to question. A tiny house build in the crowded lowlands will attract more energy supply than one that’s built by the mountainside.

Consequently, it will take more effort to make it house energy efficient. More design will have to be factored in to make it a sustainable home design.

3. Environmental Considerations have a Role

Whenever establishing a tiny residence, it’s crucial to examine the environmental situation before determining the energy requirements. Climatic conditions have a significant role in determining the energy requirements for survival in certain places.

The Polar Regions, for example, will demand that small house designs take into account the freezing temperatures before establishing one. On the other side, the arid areas will require less heat supply due to the warm weather. This lowers down the energy bill significantly.

4. Airtight Tiny House Designs

Airtight conditions are scientifically recommended for temperature regulations. All tiny house builders have the know-how to design airtight houses. These are considered energy efficient since the power generated can be circulated and reused within the rooms, lowering the need for massive production.

The temperatures can be maintained at a favorable constant irrespective of the environmental temperature outside the house. Energy loss through radiation was a key concern to tiny house builders but has since been addressed conclusively by the establishment of airtight house designs.

5. Heat Recovery Plans

Heat Recovery Ventilation (HRVs) are the latest innovations in the designing of energy-efficient tiny residences. They employ a technique that utilizes the waste hot air or fumes from the house to heat the fresh incoming breezes. That way, the energy loss from the residence is limited.

Tiny houses build in this manner are comfortable and too cheap. Instead of spending on a heating system, little energy is used, and the residence is almost self-sustaining heat.

6. Lighting Plans for a Tiny House

Tiny houses often work with low budget lighting systems to cut cost. The best tiny house ideas so far have been vested on the use of solar energy.

Small solar panels and car batteries are sufficient enough to provide a lighting system for a tiny residence. They are cost-efficient and energy-efficient as well. They use the natural solar energy that’s always available, so their guarantee is a sure bet.

7. HVAC Systems are the Best

Heating, Ventilation, and Air Conditioning Systems are a new rise in tiny house plans. HVACS handles the budget on how to generate heat sufficient for the house and regulate it through thermostats.

Moreover, ventilation plans for tiny house living apartments have been a gamble given that the heat needs to be controlled. However, the HVAC systems ensure that your tiny residence is well heated and ventilated at the same time.

8. Insulation Plans for a Tiny Residence

A small residence needs a nice insulation plan in addition to being airtight. This is especially important for tiny house living rooms. The insulation plan ensures that heat loss is minimized through both conduction and radiation.

Minimizing the heat loss translates to reducing the energy needs and therefore reduced the cost of producing the energy in the first place. There are specific wall designs that offer good insulation properties for the tiny houses.

9. Programmable Thermostat for Heat Regulation

Small rooms need close monitoring of the temperature within the room. They warm up more quickly than normal apartments. Therefore, a programmable thermostat is an efficient plan to regulate the temperatures.

They can be designed to stop the heaters when the temperature hits a set maximum and turn them on in case the temperatures drop to a minimum. This goes hand in hand with the use of proper insulation and an airtight room design.

The kitchen is not the best place to have the programmable thermostat as the temperatures tend to be higher than other rooms.

10. Moisture Management in a Tiny Room

Moisture management is an essential aspect of controlling the energy efficiency of a tiny room. The amount of humidity within the room determines the temperature characteristics of that house.

Moreover, it is an important determinant of the duration of heat required in that room. If the design of the tiny house requires high stable temperatures, the rooms have to be maintained humid for that long.

If cooler temperatures are desired, moist cold air can be a good standardizer. A tiny house kitchen is a remarkable place for generating heat for the house, therefore, the control of the temperature characteristics can be managed from here.


In an era where everyone is conscious of the energy bills, tiny houses have offered a welcome alternative for housing plans. The only determinant is how big, tiny house electric bills get. The energy efficiency of tiny houses is a huge relief for many people. However, building a tiny house requires some special skills. For the tiny house to be conservative of energy that much, a lot of planning and innovation has to be put in place. But the result is satisfactory.

If you enjoyed this article, let us know in the comments!

In This article

Share this post with your friends

About the Author
Stephanie McQueen
Stephanie McQueen
Stephanie is the content curator and resource hoarder of all things tiny houses. She believes everyone can live a sustainable lifestyle, no matter the size of your house. Connect with Stephanie through LinkedIn or her done-for-you marketing agency, Employed By Life Online.
Read More Like This